Home > Ambiente e salute > 4 ways to solve the problem of Bluetooth and WiFi signal interference

4 ways to solve the problem of Bluetooth and WiFi signal interference

scritto da: Mobilejammer | segnala un abuso

4 ways to solve the problem of Bluetooth and WiFi signal interference


Wireless communication must ensure sufficient carrier-to-interference ratio (signal-to-noise ratio) in order to receive effectively and complete communication. The mobile communication device destroys the reception conditions of the mobile phone and cuts off the communication connection between the mobile phone and the base station by generating interference signals of the same frequency as the mobile phone. To achieve the effect of shielding communication. The jamming power of the signal jammer is fixed, and the shielding radius of the unobstructed space is determined by the path attenuation and the signal level of the receiving base station. The following table shows the comparison table of distance and path attenuation. Then the coverage radius can be determined by the output channel power of the jammer, the base station signal level, and the coverage line gain. desktop signal blocker You may have encountered the problem of Bluetooth and wifi jammer. Both of them mainly use the 2.4GHz frequency band. When they are turned on at the same time, the data throughput of Bluetooth will drop sharply, it is difficult to pair devices, and Wi-Fi is interrupted intermittently. The network is restricted. There is basically no way to cure this problem, but you can temporarily help you solve some problems with the following solutions. This article provides 4 methods, you can refer to the following. Method 1: Connect to a 5GHz wireless network Now that you know that the problem lies in the frequency band conflict, you can consider buying a dual-band (2.4GHz + 5GHz) router and connect to a 5GHz Wi-Fi network. This method can completely solve the interference problem, but silver is also essential. Method 2: Change Wi-Fi channel Take the TP-Link router as an example, log in to the router web management page, find the channel option in the wireless settings -> basic settings, and change it to any one of 1, 6, or 11. These are 2.4GHz non-overlapping transmission channels, which are more stable than other channels. Method 3: Turn on the Bluetooth coexistence function of the network card In the wireless network cards produced in recent years, the Bluetooth coexistence function is supported. The method is to find Bluetooth Collaboration or Bluetooth Coexistence Mode (name may be different) in the advanced tab of the network adapter properties, and set it to Enable (Enable ). Windows will automatically reconnect to Wi-Fi, and the interference with Bluetooth will be alleviated. Method 4: Stay away from the source of interference Separate Bluetooth terminals from routers, microwave ovens, cordless phones and other devices that use the 2.4GHz frequency band.

Fonte notizia: https://www.jammer-mart.com/


WiFi signal interference |



Commenta l'articolo

 

Potrebbe anche interessarti

this speech collected Zi Zi students usually written down


cell phone jammer protection system vulnerability threat


How Difficult Is To Charity Fundraising During Pandemic Situation


Sung Ho Choi, ultrarunner: C'è tempo per lo sport e anche tempo per divertirsi!


Bluetooth headset battery can change it?


 

Se ritieni meritevole il nostro lavoro fai una donazione


Recenti

Stesso autore